Table Of Content
In fact, all of the following gripes I have are admittedly nit-picky stuff because frankly the Capture Clip works well. First released on Kickstarter in 2011, the Peak Design Capture Clip aimed to give photographers an easier way to carry their camera. Seven years later, we now have the Capture version V3, a much sleeker and more streamlined iteration of the original product.
Enhance Your Phone's Wildlife Photography: Ollin Digiscoping System Review
Even with a heavy camera attached, the Capture feels very secure. The only time I worried while using it was when pulling my backpack off my shoulders. I sometimes instinctively like to toss my bag around - not a good idea when your precious gear is connected to the front. Attaching the clip portion to your bag for the first time can be a bit of a hassle but the key is just to loosen it more than you think you need to. Most folks will attach it to a backpack but it can easily be attached to a messenger bag, belt or something else entirely.
Quick on the Draw? Not Always
In order to get the camera from stowed position to shooting position with a harness, you just need to pick it up and shoot. With the Capture Clip, you need to press a locking pin and guide the camera out of the grooved mounting channel before it’s in your hands and ready to shoot. With a harness system, you can just let the camera fall to your side, whereas the Capture Clip requires you to slide it back into position correctly. The difference is only a matter of seconds, but for fast-paced events, it can be important.
CapturePro Camera Clip V2
Why Insurance Could Have Saved Me When My Peak Design Strap Failed - Fstoppers
Why Insurance Could Have Saved Me When My Peak Design Strap Failed.
Posted: Wed, 25 Feb 2015 08:00:00 GMT [source]
Sure, I could slip and land face-first and crush the camera, even in its pouch, but I'm quite sure my camera would be a lot more scratched up if it weren't in a pouch. I just don't see any advantage to this clip for my uses. For casual strolls in fair weather, it's probably fine, but for mountaineering, I'll take all the protection I can get. My feelings exactly, The freedom to have your hands free and the camera available instantly is phenomenal. Well made product, and Peak Design is a very responsive company in my experience.
Build Your Kit
Mine can be a bit tricky to clip in if I try to slide the base plate in at the wrong angle. On the trail, I typically carry a lighter camera on the clip and my DSLR in the pack. Once attached they stay in place and they are easy to use. I keep one body in my 5L case and the other attached to the outside. Love this, love the attachments and love the plates.
For hiking, I prefer a top-load-zoom pouch riding on my chest on a neck strap or clipped to my backpack's shoulder straps. It protects the camera from dust, water and knocks while making the camera easily accessible. V3 boasts a 'smaller, lighter and lower profile' than V2 – more specifically it's 57 g / 2 oz lighter (clip plus plate), 2.1 cm narrower, 1.2 cm shorter and 0.8 cm thinner. From a design perspective this means an accessory that looks less like a chunky piece of gear and more like an integrated piece of design affixed to your bag or strap. It's made of all aluminum (minus some rubber bits for gripping your bag strap) and has a smooth anodized finish, compared to the power-coated finish of its predecessor.
Look how popular the Holdfast Moneymaker is with wedding photographers. I've mounted 'plastic' cameras on tripods and pointed them in every available direction. Not in a single instance did that "damage or distort" the body and I've never heard of it doing so. I totally understand where you are coming from.
Peak Design Capture Clip Review Final Words
It then acts in conjunction with the standard plate as a very secure location to mount your camera. I actually have capture plates on my camera all the time (thankfully they won't block the battery cover) and only time I used the wrench was attaching them on. But if you don't need to, you can forget about it (just keep it in your bag...or keychain?) And I don't know about the updated versions, but mine has the folding 'handle' that you can screw on/off without the wrench...
I mean that the invented product is so functionally appropriate that it becomes a new standard. The Peak Design Capture Clip V3 is just like a wheel. It’s an uncomplicated, useful, and seemingly obvious solution to keep a photographer’s camera mounted on or close to their body. Clip for rigidly carrying any camera on any belt, strap, or bag. You paid good money for that camera, so get it out of your bag and use the dang thing.
It would be mighty cool if, instead of a mechanical locking relationship between the clip and plate, there were a magnetic one. It would solve the issue of having to guide the standard plate into the clip, which could save time deploying and stowing one’s camera, thus improving ease of use. It could be less expensive, being a small piece of metal that runs $50 for the clip itself and $70 for both the clip and standard plate.
The second day I used it I shot a protest and midway through I found that one of the mounting screws had backed all the way out and fallen off! All that was holding the camera onto the pack strap was the second screw and friction. But Kenmore Camera immediately replaced the whole clip and I've used it for more than a year without incident. The lighter a camera the less noticeable it is on my chest, but I've carried a D610 with zoom, a D5200 and an EM-5, along with film cameras with no issues.
Included Standard Plate is not compatible with legacy Capture models (v1 and v2). Discount will be shown on final checkout screen and will not work with other coupons or deals. Enter your information below to be notified when Standard Plate is back in stock. See our stock article for additional information. Not backwards compatible with previous versions.
With a 2nd Capture clip you can switch from backpack to belt carry instantly, or leave a clip permanently attached to your favorite pack. Added bonus is i now have a 'spare' V2 base plate which is now permanently attached to my 's tripod collar doubling as a tripod mount. I was one of those Kickstarter pledges back in the day... It's so much faster for quick stowage than using your bag. It's also awesome for changing lenses on the fly, since you can clip your camera facing up as well as down. I suspect the biggest reason for having tripod feet on big long lenses is not to protect sockets, but simply to keep the center of gravity somewhere close to the base of the tripod.
